LDPE LLDPE Low Variation Dual Lips Air Ring

LDPE LLDPE Low Variation Dual Lips Air Ring

Send Inquiry

AREO-1

Thin Film Air Ring

For thin film of packaging, low variation of thickness, high output, easy to set up.
For thin film of packaging, low variation of thickness, high output, easy to set up.
Very low thickness variation and high output blown film
Very low thickness variation and high output blown film

Super fast air ring for thin film, packaging film, low variation film thickness requirement, can be found the satisfaction from AREO-1 dual lips air ring. This air ring is suitable for thin film 100 microns below, LDPE / LLDPE / MDPE single or multi-layer blown film.

With big air chamber for large volume air supply and good Design of Venturi principle and Fluid Mechanics, AREO-1 air ring has fast speed and excellent stability for blown film extrusion, which is the main product of Chuo Yii company as it has been adopted widely in global market more than 10 years. Sharing base can be exchangeable with HDPE inserts so that it shall become AREO-5 HDPE air ring.

Features

  • For thin film 100 microns below, LDPE / LLDPE / MDPE single or multi-layer blown film.
  • For packaging film, printing precision and lamination film as well as PVC shrinkage film or PLA film.
  • Low thickness variation, bubble stability, low frost line fast reachable.
  • Easy to fix with die; and speedy up soon.
  • Easy to maintain and clean up.
  • Exchangeable with HDPE inserts (to be as AREO-5).
  • High air chamber for large volume air blown up with good design of Venturi principle.

Gallery

Related Products
  • HDPE High Speed Dual Lips Air Ring - For HDPE Mono / ABA film, stable bubble up; low variation thickness, fast cooling.
    HDPE High Speed Dual Lips Air Ring
    AREO-5

    Super high speed HDPE air ring, AREO-5 is applied for thin or thick, single or multi-layer blown film; especially suitable for HDPE ABA blown film. Due to its excellent deign of exits, the air volume effectively reaches each point of bubble and evenly cool down molten from exits. The Dual Lips design enables the first exit air smoothly bringing up; but has no conflict with the 2nd exit air; thus it creates good effect of smooth flowing up along with bubble to take heat out from there.

  • LDPE LLDPE Bubble Stabilized Air Ring - Good Venturi design, bubble closely attached with cone wall; stable and low variation.
    LDPE LLDPE Bubble Stabilized Air Ring
    AREO-1C, 2C, 3C

    Except dual exits design, the applying of the venturi effect of additional cones up is able to settle down bubble effectively. The under-pressure is created in order to stabilize bubble. Huge suck-in air is also to transfer heat from bubble molten. Cone type air ring, AREO-1-C, 2C & 3C are optionally provided based on customers need. It is used for thick and thin film LDPE / LLDPE / MDPE single or multi-layer blown film.

  • Film Thickness Fine Tuning Die Head with IBC Tubing - Fine Tuning Die Head with Internal Bubble Cooling Set.
    Film Thickness Fine Tuning Die Head with IBC Tubing
    ADJUSTABLE DIE HEAD

    The particular design of fine tuning gap of die head enables manual fine adjustment of gap size; therefore, the molten flow can be of 6 ~ 7 % gauge variation. The accessory of IBC enables bubble cooling to be fast and stable cooling from internal side. The die head body is made by S45C or SCM440 (JIS and international standard) steel; its surface treatment is by hard chrome plating or Electrodeless Nickel Alloy plating with same effect of mirror surface. The roundness of die lip make uniformly flow distribution of molten extruded; therefore, excellent thickness control is obtainable.

  • Adjustable Stabilizing Ring - Adjustable manual type stabilizing ring
    Adjustable Stabilizing Ring
    IRIS RING

    Adjustable design of the size control knob with lock-on function.

Files Download

Best Sale

LDPE LLDPE Low Variation Dual Lips Air Ring Expert for your Blown Film Extrusion - C.Y.

Located in Taiwan, Chuo Yii Enterprise Co. sells LDPE LLDPE Low Variation Dual Lips Air Ring (main core of blown film machinery) in over 45 countries since 2009.

C.Y.'s Air Rings are designed for up to 7-layer blown film extrusion line. Air ring for thickness and output control film, low gauge variation, fast cooling and bubble stability, as well as adjustable for dual lip exits, adjusted handles or 360 degree circle nut turning.

Top quality alloy steel made Die Heads are available for up to 4 color stripes, 7 layers blown film line along with reliable sourced materials such as HDPE / LDPE / LLDPE / MDPE / PP / PVC / PA / PLA.

C.Y. has been offering customers high quality air rings and die heads in Foundry Industry. Both with advanced technology and 20 years of experience, C.Y. makes sure each customer's demands are met.

Hot Products

AREO-2 Air Ring

AREO-2 Air Ring

Thick Film / LLDPE / MLDPE blown film Air Ring - Low gauge variation, high output, fast cooling.

Read More
AREO-1 & AREO-5 Air Ring

AREO-1 & AREO-5 Air Ring

LDPE / LLDPE / HDPE Low variation thickness and Fast Cooling Air Ring, HDPE / LDPE exchangeable; for thin film or ABA HDPE film.

Read More
CYG-7L Air Ring

CYG-7L Air Ring

Adjustable dual lips design, suitable for over or smaller size B.U.R. blown film.

Read More