Super fast air ring for thin film, packaging film, low variation film thickness requirement, can be found the satisfaction from AREO-1 dual lips air ring. This air ring is suitable for thin film 100 microns below, LDPE / LLDPE / MDPE single or multi-layer blown film. With big air chamber for large volume air supply and good Design of Venturi principle and Fluid Mechanics, AREO-1 air ring has fast speed and excellent stability for blown film extrusion, which is the main product of Chuo Yii company as it has been adopted widely in global market more than 10 years. Sharing base can be exchangeable with HDPE inserts so that it shall become AREO-5 HDPE air ring.
Super fast air ring for thick film, packaging film, low variation film thickness requirement can be found his satisfaction from AREO-2 dual lips air ring. This air ring is suitable for thick film more than 100 microns, especially for LLDPE / MLLDPE single or multi-layer blown film. Owing to the larger air chamber and exit shape, the output cooling air is powerful enough to sustain initial molten to be cooled down quickly; therefore, bubble can be continually blown up stably and quickly. Design of Venturi principle and Fluid Mechanics considering, AREO-2 Air Ring has fast speed and excellent stability for blown film extrusion. In most of the case of LLDPE more than 50% and thick film, AREO-2 is the best choice.
Super fast air ring for thin film, packaging film, low variation film thickness AREO-6 air ring is suitable for thin film 100 microns below, LDPE / LLDPE / MDPE single or multi-layer blown film. Excellent design of helix entrances of spiral air inlets; the air flows are conducted from inlets; effectively brought into chamber; and going out through dual exits. LDEP / HDPE inserts are exchangeable so that they are applied optionally.
AREO-1C, 2C, 3C
Except dual exits design, the applying of the venturi effect of additional cones up is able to settle down bubble effectively. The under-pressure is created in order to stabilize bubble. Huge suck-in air is also to transfer heat from bubble molten. Cone type air ring, AREO-1-C, 2C & 3C are optionally provided based on customers need. It is used for thick and thin film LDPE / LLDPE / MDPE single or multi-layer blown film.
Main function of the adjustable air ring AREO-3 is to rectify film thickness variation due to precision problem of die head. Fine tuning is available by the arrayed 360 degree adjustable screws. Most of the case of this adjustable air ring is fit for thin and thick film, LDPE / LLDPE / MDPE single or multi- layer packaging film and lamination film.
Dual orifices adjustable air ring, CYG-7L has top handles for upper and lower exits adjustment. The operator is able to reach his set up easily. Moreover, the suitability of wide range of B.U.R. for smaller and larger blown film makes this air ring valuable to those who desire to use one air ring while for different sizes of blown film width.
- ALUMINUM SAND CASTING CUSTOMIZED
- Q & A
- Contact Us
C.Y. Thin film Service Introduction
Chuo Yii Enterprise Co. is Taiwan Thin film supplier and manufacturer with more than 20 years experence. Since 2009, in the Foundry Industry, C.Y. has been offering our customers high quality Thin film production service. With both advanced technology and 20 years experience, C.Y. always make sure to meet each customer's demand.